GB
3.3
Unpacking
WARNING
Danger of accidents due to the heavy weight of the units
Uncontrolled movements of the units during assembly can cause accidents.
➢ Use suitable lifting equipment and secure units to prevent accidents.
➢ Also secure assembled components.
CAUTION
Danger of injury due to sharp edges
➢ For manufacturing reasons, the metal edges of the unit may have burrs.
➢ Wear gloves during service and assembly work.
▪ Perform a visual inspection for transport damage when unpacking the air/water heat exchangers.
Take note of any loose parts, dents, scratches, visible loss of oil etc.
▪ Inspect the packaging material for any loose functional parts before disposal.
Reported any damages to the freight carrier immediately. Observe the "Terms for Cases of Damage".
Precise information about defects, including possible photos must be provided for the handling of warranty
claims. Always specify the type designation and serial number.
The "General Terms for Deliveries and Services" of ZVEI (Zentralverband der Elektrotechnischen Industrie;
Central Association of the Electrical Engineering and Electronics Industry , in Germany) according to the latest
revision apply.
Operating manual PWS and PWI 6302 086100050a © Pfannenberg GmbH
Page 10 / 31