Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Time (the clock is not set ex factory)
«Boil 95°C» + «Quick wash»
The hours can be set using the «Coloureds 60°C » button
and the minutes using the «Boil 95°C»» button.
Language (ex factory DEUTSCH)
«Gentle programme» + «Quick wash» ÷ «Quick
wash»
This setting is temporarily valid for the selected pro-
gramme and reverts back to the default language a few
minutes after completion of the programme.
(See «Extended basic settings/Default language»)
Extended basic settings
«Coloureds 40°C» + «Coloureds 60°C » + «Quick
wash»
X By pressing these three buttons at the same time, the
display shows the extended basic settings.
X Repeatedly pressing the «Coloureds 40°C» button
shows the possible settings.
X Pressing the «Coloureds 60°C » button allows the
settings to be changed.
X Pressing the «Quick wash» button interrupts the dis-
play of the settings.
Skincare function (ex factory OFF)
Select «Extended basic settings»!
If the skincare function is switched on, two extra rinses
are added to each wash programme. These additional
rinses can prevent skin allergies.
Child lock (ex factory OFF)
Select «Extended basic settings»!
The child lock is to prevent accidental starting, changing
or deletion of a programme by small children.
Operating the machine with the child lock switched on:
«Start» + «Quick wash»
Hold the Start button down and press the quick wash
button.
Rinsing stop (ex factory INDIVIDUAL)
Select «Extended basic settings»!
If this function is switched on, all easy care, fine wash or
shirt programmes automatically add a rinsing stop.
43
Memory function (ex factory OFF)
Select «Extended basic settings»!
If the memory function is switched on, the selected
temperature and spin additional functions are saved for
each programme. If the same programme is selected
again, the stored values are automatically used.
The values can then be altered.
Hygiene programme (ex factory OFF)
Select «Extended basic settings»!
If the hygiene function is switched on, all possible
hygiene measures will be indicated at the display during
programme selection (See also chapter «Cleaning and
Maintenance»).
Soap wash programme (ex factory OFF)
Select «Extended basic settings»!
When this programme is switched on, an extra rinse is
added.
Soak programme (ex factory OFF)
Select «Extended basic settings»!
When this programme is switched on:
soaking time of up to 12 hours.
X After the programme is selected, set the desired
soaking time by pressing the «Pre-set starting time»
button.
The soaking time set or remaining is displayed until
the programme starts (1-12 hours).
X The soaking time starts when the start button is
pressed.
Notes:
X Add soaking detergent in section I of the detergent
drawer and your usual detergent in section II.
The soaking programme must be reprogrammed for
each wash.
Soaking can be interrupted and the wash programme
started by pressing the quick wash button.
The current soaking time is stored in the event of a
power cut. The duration of the power cut is not taken
into account.
Cool down function (ex factory OFF)
Select «Extended basic settings»!
Detergent solution cooling: When the detergent solution
cooling function is switched on, boiling water is cooled
with cold water at the end of the washing process.
This helps to prevent damage to older drains.
This cooling always takes place in the easy care and Super-
finish pro grammes, irrespective of this setting. This helps
to prevent creases.
Loosening up at programme end (ex factory ON)
Select «Extended basic settings»!
When this function is selected, the laundry is tumbled
for 5 minutes at the end of the programme.
Werbung
Inhaltsverzeichnis
