Hob Functions Table - ETNA AKI586ZT Gebrauchsanweisung

USE
Fault code; See 'Troubleshooting table'.
Fault code; See 'Troubleshooting table'.
Lock function active.
Bridge zones active.
Downdraft Downdraft status
display
Extraction level: 1 = low level / 4 = high boost level (flashing)
<->
Grease filter cleaning indication.
Replace carbon filter indication.

Hob functions table

Function Key(s) to use
Link
Both bridge
cooking zone
keys
simultaneously
Timer
The minus (-)
and plus (+)
keys
simultaneously
Lock key
Lock
3 seconds
Downdraft
Downdraft
On/Off key
Description
The Bridge cooking zones can be linked to each other.
This creates one large zone that can be used for example for
a large fish pan or one large cooking pan.
If the zones are linked, they cannot be set to boost.
▷
Use a (fish) pan where at least one of the centre/middle
▷
positions of the Bridge zones is covered.
The timer can be set separately for each cooking zone.
Cooking times of up to 99 minutes can be programmed.
The timer stops as soon as the pan is removed and resumes
when the pan is put back. The timer alarm beeps after the set
time has passed. The cooking zone automatically switches
off when the set time has elapsed. When no cooking zone
is selected the timer works as a kitchen timer (no automatic
switch off).
The cooking levels and settings are locked.
The worktop extractor can be set at 3 fan speeds and a boost
(level 4). The timer allows you to let the fan stay On for 5, 10
or 20 minutes. The extractor will switch Off automatically after
the set time.
EN 11