Atag KD61122A/A01 Bedienungsanleitung Seite 19

How to operAte tHe refrIgerAtor
compArtmeNt
Switching on the appliance
1. Plug in the appliance
2. When the appliance is plugged in, it is
normally factory set to a temperature of 5°C.
Adjusting the temperature
For temperature adjustment, see the enclosed
product sheet.
Note:
Ambient air temperature, the frequency of
door opening, the introduction of hot food and
unsuitable appliance positioning can all affect
the internal temperature of the refrigerator,
which may differ from that shown on the
display.
Storing food the refrigerator compartment:
• Cover food to prevent it drying out
• The distance between the shelves and the
rear wall inside the refrigerator ensures the
free circulation of air
• Do not place food in direct contact with the
rear wall of the refrigerator compartment
• Do not place hot food in the refrigerator
• Store liquids in closed containers
Important:
Storing vegetables with a high water
content can cause condensation to form
on the glass shelves; this will not affect the
correct operation of the appliance.
12