Protecting The Environment; Technical Data - Black & Decker MTSA2 Originalanweisungen

Š On very uneven surfaces, or when removing
Š layers of paint, start with a coarse grit. On other surfaces,
start with a medium grit. In both cases, gradually change
to a fine grit for a smooth finish.
Š Consult your retailer for more information on available
accessories for sanding, polishing, stripping and scrubbing.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Š Safely dispose of the old plug.
Š Connect the brown lead to the live terminal in the
new plug.
@
Š Connect the blue lead to the neutral terminal.
Warning! No connection is to be made to the earth
terminal. Follow the fitting instructions supplied with
good quality plugs.
Recommended fuse: 13 A.

Protecting the environment

Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be
recovered or recycled, reducing demand for raw materials.
Please recycle electrical products and batteries according
to local provisions. Further information is available at
www.2helpU.com

Technical data

No-load speed min
-1
Weight kg
Level of sound pressure according to EN 62841:
Sound pressure (L ) 76.4 dB(A), uncertainty (K) 3 dB(A)
pA
Sound power (L ) 87.4 dB(A), uncertainty (K) 3 dB(A)
WA
Vibration total values (triax vector sum) according to EN 62841:
Sanding (a ) 6.1 m/s , uncertainty (K) 1.5 m/s
2
h
MTSA2 MTSA2
(14.4v)(H1) (Max)(H1)
0-7500 0-8500
1.3 1.3
2
(Original instructions)
EC Declaration of Conformity
%
Machinery Directive
MTSA2 sander head
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN 62841-1, EN 62841-2-4These products also
comply with directives 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of Black & Decker.
Declaration of Conformity
The Supply of Machinery (Safety) Regulations
MTSA2 sander head
Black & Decker declares that these products described under
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN 62841-1, EN 62841-2-4
These products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
ENGLISH
Patrick Diepenbach
General Manager, Benelux
Black and Decker,
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
20.12.2021
2008
7