Operation; Dmx-512 Connection / Connection Between Fixtures - EuroLite RGB PAR-1500 DMX Bedienungsanleitung

All manuals and user guides at all-guides.com
Color changers must not be connected to dimming-packs.
DANGER TO LIFE!
Before taking into operation for the first time, the installation has to be approved by an expert!

OPERATION

After you connected the effect to the mains, the RGB PAR-1500 DMX color changer starts running. The
ventilation fan begins to rotate and the display lights up.

DMX-512 connection / connection between fixtures

The wires must not come into contact with each other, otherwise
the fixtures will not work at all, or will not work properly.
Only use a stereo shielded cable and 3-pin XLR-plugs and connectors in order to connect the controller with
the fixture or one fixture with another.
Occupation of the XLR-connection:
If you are using controllers with this occupation, you can connect the DMX-output of the controller directly
with the DMX-input of the first fixture in the DMX-chain. If you wish to connect DMX-controllers with other
XLR-outputs, you need to use adapter-cables.
Building a serial DMX-chain:
21/45 41601045_V_1_2.DOC