Inhaltsverzeichnis
Werbung
DO413KT
PROGRAMMING
1.
Fill the appliance with water and coffee.
2.
Press the "PROGRAM" button, until the word "program" starts flashing on the
display.
3.
Set the hour and minutes. After setting the desired hour, it will flash for a few
more seconds, before returning to the current time. The programmed time is now
set.
4.
Press the "AUTO" button, the indicator light will light up and on the display
the word "auto" is shown. The coffee maker is now programmed and will start
automatically.
5.
When there are current fluctuations, it is possible that the timer doesn't function
properly and that you need to set the program time again.
6.
When you want to reuse the previous set program time, simple press the
"AUTO" button, your coffee maker is again set to start working on the pervious
programmed time.
MAINTENANCE AND CLEANING
•
Remove the plug from the socket before cleaning.
•
The filter holder can be removed for cleaning.
•
Clean the outside of the appliance regularly with a damp cloth. Dry thoroughly
afterwards.
•
Don't use any abrasive cleaners.
•
The hot plate needs to be cold before cleaning.
•
Never immerse the appliance in water.
•
Never use a cloth for cleaning the water tank. Little please of fabric could be left
in the water tank. Rinse the water reservoir regularly with cold water.
DESCALING
Regularly decalcify your coffee maker. Regular decalcification contributes to a
constant coffee quality, a lower energy use and prolongs the durability of your coffee
maker. At normal use we recommend to decalcify the appliance every 3 to 4 weeks.
1.
For descaling the appliance you should fill the coffee maker with 1/4 of vinegar
and 3/4 of water and let it run through until the liquid dripping out has lost its
yellow colour.
2.
Afterwards, let the coffee maker run through twice with clean water, to remove
the vinegar taste and all scale residue.
3.
Clean the carafe, the lid and the filter holder.
28
Werbung
Inhaltsverzeichnis
