BGS technic 6691 Bedienungsanleitung Seite 3

SPECIFICATIONS
External thread (metric): M4 - M45
External thread (imperial): 5/32"- 1.3/4"
Blades: HSS steel, hardness 62 (± 2) HRC
Tool body: chrome-plated
Length: 77 mm
Width: 22 mm
Weight: 290 g
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This thread chaser is easy to use, infinitely adjustable using a knurled screw and is used for damage-
free recutting and cleaning of damaged external threads. The thread chaser is suitable for right-hand
and left-hand threads, the wide jaw guides the chaser well and can be used regardless of the thread
length.
SAFETY INFORMATIONS
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do not make any changes to the tool.
• Check the tool for damage before use, do not use the tool if it is damaged.
• Store the tool in a dry and safe place out of the reach of children.
• Always wear protective goggles and work gloves when using this tool.
OCCUPATIONAL SAFETY
When using this tool,
always wear following protective equipment:
Safety glasses
•
• Work gloves
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Thread recutter
for external thread M4 - M45
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 6691
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed