Himiway ESCAPE Benutzerhandbuch Seite 8

◆ Pedals Installation (15mm wrench)
Make sure your pedals are installed on the correct side, as installing on the wrong side
threads.
Before you install the pedals, apply a small amount of waterproof grease onto the
straight, rotating in the direction of the pointer shown on the crank. If it is not spinning
◆ After Bike Assembly
inside front cover of this manual to facilitate failure reporting. Make sure each letter and
Make sure you take down Make sure you take down
the Capital Letters here! the Capital Letters here!
Make sure you take down Make sure you take down
the "hyphen" here! the "hyphen" here!
NOTICE:
retailer's instructions.
8