Selecting Tracks; Fast Searching (Audible); Random Track Play (Mix); Scanning Tracks (Scan) - Bosch Calais USB40 Bedienungs- Und Einbauanleitung

MP3-CD/USB operation
Note:
The device will automatically skip any
directories that do not contain MP3
files.
The device treats all the directories
and subdirectories as if they were on
a single level. Repeatedly pressing
the or the
bring you to all the subdirectories.

Selecting tracks

f Press the or 8 button to change to
the previous or next track.
If the current track has already been playing for
longer than 10 seconds, pressing the
button once will start it again.

Fast searching (audible)

In order to search rapidly backwards or
forwards
f Hold down the or
you reach the desired location.

Random track play (MIX)

To play the tracks in the current directory in
random order,
f Press the 3 < button repeatedly until
"MIX DIR" appears in the display.
The MIX symbol appears on the display.
To play the tracks in the MP3 data carrier in
random order,
f Press the 3 < button repeatedly until
"MIX ALL" appears in the display.
The MIX symbol appears on the display.
Robert Bosch Car Multimedia GmbH
8 button will also
8
8 button until
Canceling MIX
In order to stop playing in random order,
f Press the 3 < button repeatedly until
"MIX OFF" appears in the display.
The MIX symbol on the display disappears.

Scanning tracks (SCAN)

To play the tracks in the MP3 data carrier in
ascending order for about to 10 seconds each,
f Press the 4 < button repeatedly until
"SCAN TRK" appears on the display.
To sample all the tracks in the current direc-
tory,
f Press the 4 < button repeatedly until
"SCAN FLD" appears on the display.
Ending SCAN
In order to stop sampling the tracks
f Press the 4 < button repeatedly until
"SCAN OFF" appears on the display.
The currently scanned track will then continue
to be played normally.
Repeating individual tracks or
whole directories (RPT)
To repeat the current track,
f Press the 2 < button repeatedly until
"RPT TRK" appears in the display.
The RPT symbol appears on the display.
To repeat the current directory,
f Press the 2 < button repeatedly until
"RPT DIR" appears in the display.
The RPT symbol appears on the display.
en | 55