Fm Menu; Wireless Music Streaming; Aux In; Usb - Albrecht Audio DR 870 CD Bedienungsanleitung

10.5. FM menu

In FM mode, press the MENU button or press and hold down the button on the remote control
to call up the FM menu. In this menu you can view the station list or initiate a new station search.
Use the "Search sensitivity" menu item to set whether only strong or all recognised stations should
be included in the station search. The "Audio settings" menu item determines whether stereo
transmitters should be used or whether playback should be limited to mono transmitters. The main
menu can also be called up directly from this menu.

11. Wireless music streaming

A Bluetooth-enabled mobile phone can be used for wireless playback of any audio content. For this
purpose, you need to activate the "Bluetooth" mode via the main menu. Once this is done, select the
"ALBRECHT DR 870 CD" device on your mobile phone. For more details about operation of your
mobile phone, please refer to the device manual.

12. AUX IN

This mode is used for wired playback of audio content. To do this, connect an audio device to the
AUX IN connection on the back of the device using a 3.5 mm audio jack cable.

13. USB

Connect a USB storage medium (USB stick, etc.) to the USB socket on the back of the unit. MP3
files on it can now be played. Playback occurs alphabetically according to folder and file names.
Use the rotary wheel or the / buttons on the remote control to skip to the next /
previous song. Press the rotary wheel or the button on the remote control to pause and
resume playback. Press the button to activate random playback and the button to switch
between normal playback, repeat of the current song and repeat of all songs.
With the INFO button on the unit or by briefly pressing the button on the remote control, you
can switch between displaying the file name and the various information embedded in the MP3 file
(title, artist, album).
14. CD
In CD mode, both commercially available and self-burned CDs can be played back. To do this,
insert the CD slowly into the CD slot with the labelled side facing upwards until the unit starts to pull
it in automatically. If the unit is not yet in CD mode, it will start automatically and playback will begin.
To eject the CD, press the button on the unit or on the remote control.
CD playback is controlled in the same way as USB mode (see chapter "USB" on page 23).
NOTE: Do not touch the bottom of CDs as this may cause reading errors. We recommend touching
CDs only on the outer edge and the centre cutout.
23