IMPORTANT: ONLY THERMO FIREPLACES WITH
COILS DRIVEN BY A THERMAL RELIEF VALVE
SHOULD BE INSTALLED ON CLOSED TANK SY-
STEMS (version marked with the abbreviation CS).
system, which is to be compliant with UNI standards 10683 –
The thermal relief valve (TRV - provided by Edilkamin) must
be connected to the cooling circuit (AL) with a minimum
pressure of 1.5 bar.
JA = automatic relief valve
S = drain
Litres ?
water present in the system itself (an expansion tank shared with
other generators is not allowed).
1 Year
SAFETY INFORMATION
-
- 24
H
OCEANO MUST NEVER BE MADE TO OPERATE WI-
2
THOUT WATER IN THE SYSTEM.
MUST BE MADE WITH A PRESSURE OF ABOUT 1.5 BAR.
IT CAN BE DAMAGED IF IT IS IGNITED WITH NO WA-
TER IN THE SYSTEM.
wood combustion in the hearth.
place pertain to non-compliance with the installation instruc-
tions, direct contact with live electrical parts (inside), contact
must be carried out according to the instructions given in this
with wood.
combustion is fully automatic and requires no manual interven-
tion.
(e.g. GlassKamin) and a cloth. Do not clean when hot.
rekindle the embers.
itself.
trical parts of the system with wet hands.
safely.
-
-
-
-