Beko WTV 7712 BLS Bedienungsanleitung Seite 17

To enable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds. While you're holding the button
pressed for 3 seconds, C03, C02 and C01
will be displayed respectively.Then, "Con" will
be displayed to warn the user that child lock
is enabled.If you press any button or turn the
Programme Selection knob while the Child Lock
is enabled, the same warning will be displayed.
To disable Child Lock:
Press and hold the Auxiliary Function button 2
for 3 seconds while the programme is running.
While you're holding the button pressed for 3
seconds, C03, C02 and C01 will be displayed
respectively. Then, "COF" will be displayed to
warn the user that child lock is disabled.
C
INFORMATION
• In addition to the method above, to
deactivate the Child Lock, switch the
Programme Selection knob to On/Off
position when no programme is running,
and select another programme.
• Child Lock will not be disabled after
a power failure or unplugging.
•
AntiCrease+
If you press and hold the auxiliary function
button 3 for 3 seconds, this function will be
selected and the programme follow-up light of
the relevant programme will turn on. When this
function is selected, the drum will rotate for up
to eight hours to ensure that the clothes do not
crease at the end of the programme. At any time
during these eight hours, you can cancel the
programme and unload the machine. Just press
any button or turn the programme selection knob
to end the function. The programme follow-up
light will remain on even if you end the function
by pressing any button. If you end the function
by turning the programme selection knob, the
programme follow-up light will remain on or go
off depending on the selected programme. If
you do not cancel the function by pressing the
Auxiliary Function button 3 for 3 seconds, it will
be used in the next washing cycles as well.
4.3.11 - End Time Adjustment
The End Time Adjustment function allows you to
set the end time of the programme up to 19 hours.
You can increase this time by 1-hour intervals.
17 / EN
C
INFORMATION
• Please do not use liquid detergent if you
have selected the End Time Adjustment
function. Stains might remain on the clothes.
1. Open the loading door, place the laundry
and add detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if required,
the auxiliary functions.
3. Press the End Time Adjustment button and
select the desired time.
4. Press the Start/Pause button. The delayed
end time you have set will be displayed.
Countdown will start for delayed end. On
the display, "_" will move up and down next
to the delayed end time.
C
INFORMATION
• If the programme has not started,
you can add laundry into the machine
during the delayed end time.
5. At the end of the countdown, duration of
the selected programme will be displayed.
"_" will disappear and the selected
programme will start.
Changing the delayed end time
If you want to change the time during countdown:
Turn the programme selection knob to cancel the
delayed end time function, and then set the desired
time again.
1. Press the End Time Adjustment button. When
pressed for the first time, the programme
duration will be rounded up to the closest
whole number time. Each following press will
increase the time by an hour.
2. If you want to decrease the delayed end
time, press the End Time Adjustment button
consecutively until the desired time is displayed.
Cancelling the delayed end function
If you want to cancel the delayed end time
countdown and start the programme immediately:
1. Set the Programme Selection knob to any
programme. This way, the Delayed End time
will be cancelled. The End/Cancel light will
flash continuously.
2. Then, select the programme you want to
run again.
Washing Machine / User Manual