Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
customer service or a similarly
qualified person in order to avoid
hazards.
A fire can occur if the appliance
is not handled with care.
Caution when using the device
near combustible materials. Do
not point to the same location
for an extended period of time.
Do not use in the presence of an
explosive atmosphere.
Heat can be passed to combus-
tible materials which are hidden.
After use, place the appliance on
the stand and allow it to cool
down before it is packed away.
Do not leave the appliance unat-
tended while it is in operation.
Check that the solid fuel lighter
is in the correct position.
Disconnect from the mains
before removing the solid fuel
lighter from the fire.
Allow the solid fuel lighter to cool
before storing it away.
The cable or other combustible
materials must not come into
contact with the hot parts of the
solid fuel ignitor.
3 General safety instructions for
power tools
WARNING! Read all instructions! Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury!
Save these instructions for future reference!
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated (cord-
less) power tool.
7062788-Batavia-Multiheater-MA-1702-28.indb 17
3.1 Work area
a.
Keep work area clean and well lit. Clut-
tered and dark areas invite accidents.
b.
Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust. Power
tools create sparks which may ignite the
dust of fumes.
c.
Keep children and bystanders away
while operating a power tool. Distractions
can cause you to lose control.
3.2 Electrical safety
a.
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs which
earthed (grounded) power tools. Unmod-
ified plugs and matching outlets will reduce
risk of electric shock.
b.
Avoid body contact with earthed or
grounded surfaces such as pipes, radia-
tors, ranges and refrigerators. There is an
increased risk of electric shock if your body
is earthed or grounded.
c.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d.
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e.
When operating a power tool outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for out-
door use reduces the risk of electric shock.
f.
Always use tool in conjunction with a
residual circuit breaker device. The use
of a residual circuit breaker device reduces
the risk of electric shock.
3.3 Personal safety
a.
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
of drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious personal
injury.
.
17
15-03-17 10:59
Werbung
Inhaltsverzeichnis
