16
13.1
Turning the Answering Machine On/Off
From the home screen, press
Press
to "ANSW MACHINE" and then press
Press
to "ANSW. ON/OFF" and then press
Press
to select "ON" or "OFF" and then press
>A confirmation tone is played.
Press
to return to standby mode.
Note:
If the answering machine is off and the Master PIN is still set at its default 0000, the answering machine
will not answer any incoming calls.
However, if the Master PIN has been changed, it will answer incoming calls after 10 rings to allow
remote access.
13.2
Answer Mode
The phone comes with two pre-recorded outgoing messages (OGM) for the respective answer modes:
"ANSWER ONLY" and "ANSW. &RECORD".
By default, the answer mode is "ANSW.&RECORD", which allows a caller to leave a message on
the answering machine after hearing the announcement. This can be changed to "ANSWER ONLY"
mode, which does not allow callers to leave any messages on the answering machine after hearing
the announcement.
13.2.1
Set Answer Mode
From the home screen, press
Press
to "ANSW MACHINE" and then press
Press
to "ANSWER MODE" and then press
Press
to select "ANSWER ONLY" or "ANSW.&RECORD" and then press
>A confirmation tone is played.
Press
to return to standby mode.
13.2.2
Change the Voice Language
You can select a different language for the answering machine's pre- recorded outgoing message.
From the home screen, press
Press
to "ANSW MACHINE" and then press
Press
to "SETTINGS" and then press
Press
to "LANGUAGE" and then press
Press
to select your preferred language and then press
>A confirmation tone is played.
Press
to return to standby mode.
13.3
Message Playback
When there are new messages on the answering machine, the tape icon
screen.
From the home screen, press
Press
to "ANSW MACHINE" and press
Press
to select "PLAY".
>Your messages will automatically playback through the handset's speakerphone.
>Press
to listen to your messages privately through the earpiece of your handset.
.
to select.
.
to select.
.
to select.
to select.
.
to select.
to select.
to confirm.
to select.
to select.
to confirm.
flashes on the handset
to confirm.