EINHELL 41.523.72 Bedienungsanleitung Seite 15

Anleitung STE 2000_SPK7:Anleitung STE 3500 SPK1
16. Troubleshooting
Fault
Engine does not start
Generator has too little or no
voltage
18.06.2007
All manuals and user guides at all-guides.com
Cause
Automatic oil cut-out has not res-
ponded
No fuel
Controller or capacitor defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
7:39 Uhr Seite 15
GB
Remedy
Check the oil level, top up with
engine oil
Refuel
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
15