Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Charging the battery
1. First switch the helicopter off.
2. Locate the charge lead in the side panel of the transmitter, and insert the charge connector
into the helicopter socket. Switch the transmitter on, and the LED will light up green.
3. The LED expires when the battery is fully charged. Disconnect the charge lead at this
point.
4. This method of charging takes about 60 minutes.
• Never allow the helicopter battery to touch or come close to any hot object (open fl a-
me, heating radiator), otherwise there is a risk of explosion.
• Store the helicopter battery in dry indoor conditions.
• Never strike the battery with a hard object, as this could damage the cell.
• Do not dismantle the LiPo battery.
• The battery should never be left on charge unsupervised.
During the charge process the switch on the helicopter must be left at the OFF position.
Operating Instructions Nano Fighter Gyro
All manuals and user guides at all-guides.com
Switch
ON
OFF
16
Werbung
Inhaltsverzeichnis
