Herunterladen Inhalt Inhalt Diese Seite drucken

Operator's Responsibility; Intended Use - Hazet-Werk 9033 N-7 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. Operator's
responsibility
• This tool was developed and manufactured
according to the technical norms and stan-
dards valid at the time and is considered to
be operationally reliable. Nevertheless, the
device can present a danger when it is not
used as intended or in an inappropriate way
by non-qualified personnel. Please make
sure that any person using this tool or car-
rying out maintenance work carefully reads
these operating instructions and fully under-
stands all information given before using the
tool.
• Any modification of the tool is strictly forbid-
den.
• All safety warning and operating instructions
on the tool must be kept legible at all times.
Immediately replace all damaged labels or
stickers.
• All indications concerning setting values and
setting ranges must be observed.
• Always keep the operating instructions close
to the device.
• The tool must only be used if it is in good
working condition.
• All safety equipment must always be within
easy reach and should be checked regularly.
12
2
For Your Safety

2. Intended Use

Operational reliability is only guaranteed if
the tool is used as intended in accordance
with the information in the operating instruc-
tions. In addition to the safety advice in these
operating instructions, the general safety
regulations, regulations for the prevention of
accidents and regulations for environmental
protection valid for the application area of this
tool have to be observed and respected.
Always ensure that the use and maintenance
of the tool complies with relevant local and
national regulations.
• The right-angle grinder is for grinding/sepa-
rating hard workpieces, e.g. welded joints,
steel rivets, plates or similar.
• Any incorrect use of the HAZET pneumatic
tool or use that fails to comply with the safe-
ty instructions can result in serious injury or
even death.
• Any deviation from the intended use and/
or any misapplication of the tools is not
allowed and will be considered as improper
use.
• Any claims against the manufacturer and/
or its authorized agents because of damage
caused by improper use of the devices are
void.
• Any personal injury or material losses
caused by improper use of the tool are the
sole responsibility of the owner.
Gehörschutz tragen!
Wear hearing protection!

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis