Transportation And Storage - PrimAster PMAKS 20 TwinPower Gebrauchsanweisung, Originalbetriebsanleitung

ENGLISH
EN
Starting the chain saw
Before starting the chain saw, you should install the
battery pack in the chain saw and make sure the chain
brake is in run position by pulling the chain brake lever/
hand guard toward the front handle.
Checking and operating the chain
brake
Engage the chain brake by rotating your left hand around
the front handle. Allow the back of your hand to push the
chain brake lever/hand guard toward the bar while the

TRANSPORTATION AND STORAGE

Always lightly oil the chain when storing to prevent rust. Always empty the oil tank when storing to prevent leakage.
Stop the machine, remove the battery, and allow it to cool before storing or transporting.
Clean all foreign materials from the machine. Store the machine in a cool, dry, and well-ventilated place that is
inaccessible to children.Keep away from corrosive agents, such as garden chemicals and de-icing salts. Do not store
outdoors.
Fit the guide bar cover before storing the machine or during transportation.
For transportation in vehicles, secure the machine against movement or falling to prevent injury to persons or damage
to the machine.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage. Wear ear
protectors.
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled
for hours, during which it is allowed by statute or other
local regulations. Adhere to any applicable rest times
and limit your working time to the necessary minimum
time. For your personal protection and the protection
of people nearby, suitable hearing protection must be
worn.
Please observe the following: according to the German
Machine Noise Protection Regulation from September
2002, this device may not be operated on Sundays and
Bank holidays or working days from 8pm to 7am. Fur-
thermore, it is forbidden to operate the machine at the
following times of day: from 7 a.m. to 9 a.m., from 1 p.m.
to 3 p.m. and from 5 p.m. to 8 p.m.
Please do also consider any local regulations concerning
noise protection!
58
chain is rotating rapidly. Be sure to maintain both hands
on the saw handles at all times.
Reset the chain brake back into the run position by
grasping the top of the chain brake lever/hand guard and
pulling toward the front handle until you hear a click.
WARNING
If the chain brake does not stop the chain
immediately, or if the chain brake will not stay in
the run position without assistance, bring the chain
saw to an service station for repair prior to use.
DANGER
Warning This power tool generates an
electromagnetic field during operation. Under
certain circumstances, this field may affect active
or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend that
individuals with medical implants consult their
physician and the manufacturer of the medical
implant before operating the machine.
WARNING
Risk of injury by rotating impeller.
• Keep your hands in safe distance.
Never use the machine with a damaged cover or pro-
tective device or without cover or protective devices.
• Remove the battery pack before starting any adjustment,
cleaning and maintenance work on the device. Wait until
all rotating parts have stopped and the appliance has
cooled down.