Automatic Defrosting; Replacing Of The Illuminant - yuna FEDORA EKS130 Bedienungsanleitung

5.1 Defrosting
M
ANUAL DEFROSTING
WARNING! Never use any mechanical items, knives or other sharp-
edged objects to remove the encrusted ice. RISK OF ELECTRICAL
SHOCK!
1. Remove the content from the freezing-compartment and put it into a cooling
box.
2. Switch off the appliance by turning the thermostat to position 0/AUS/OFF and
disconnect it from the mains.
3. When the encrusted ice melts put some dry cloths into the freezer-compartment
to hold the water back.
4. Remove the big pieces of ice first. Afterwards remove the small pieces of ice.
5. Wipe and dry the appliance and door seals with dry and soft cloths.
6. After cleaning leave the door open for some time to ventilate the appliance.
A
UTOMATIC DEFROSTING
1. The cooling compartment is defrosted automatically. The water runs into a
container near the compressor.
2. If the automatic defrosting does not meet the requirements, e.g. on days with
high ambient temperatures and humidity, defrost the appliance manually as
described above.

5.2 Replacing of the illuminant

1.
WARNING! Switch off and unplug
the appliance before replacing the
illuminant.
2. Remove the cover.
3. Take out the illuminant.
4. Replace it by a new one (10W).
5. Reinstall the cover.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the ecodesign requirements for
nondirectional household lamps. This means that bulbs, which are used in household
appliances, must not be used to illuminate domestic establishments.
(
FREEZING COMPARTMENT
(
COOLING COMPARTMENT
)
)
58