Meister WU5402860 Originalbetriebsanleitung Seite 33

tasks during which it is possible that
the tool will come across hidden
power cables or its own cable.
Contact with a power-carrying cable
may also put metal parts of the device
under power and cause an electric
shock.
• Wear a dust protection mask when
using the device.
• Power sockets for use out of doors
must be fitted with residual-current
safety switches.
• Never remove chippings or debris
when the machine is running.
• Before drilling in a wall, ensure that
there are no electricity wires, water or
gas pipes under the surface.
• Secure small workpieces to ensure
that they are not entrained by the drill.
• Remove the power plug before
working on the machine, during
all intervals in work, and when the
machine is not in use.
• Always keep the power cable well
away from the drilling zone.
• Turn switch to OFF before plugging
into power supply.
• Always use the machine with the
additional grip.
• Do not allow persons under 16 years
of age to use the machine.
MW-5402860-Bedien-2008.indd 33 MW-5402860-Bedien-2008.indd 33
• Observe general safety instructions
for handling power tools!
• To avoid hazards, damaged power
leads must be replaced by the
manufacturer or his customer service
representative.
Do not dispose of with the
household waste!
Important! Observe the
operating instructions!
Wear goggles.
Wear a dust protection mask.
Wear ear defenders.
The housing is double
insulated
Voluntary "geprüfte Sicherheit"
seal of quality (tested safety)
ID 1111228199
CE mark (conformity with
European safety standards)
Mounting in accordance with
the SDS+ system
Impact rate
BJ Year of construction
SN: Serial number
SN: XXXXX The first two underlined
numbers give the month of
manufacture.
33
26.08.20 10:23 26.08.20 10:23