Setting Of The Temperature - Wolkenstein SFD540NF B W Bedienungsanleitung

➢ The indicator of the K
off.
➢ All keys of the display are released again.
If the K
EY LOCK
settings below can be carried out.

4.5 Setting of the temperature

➢ The settings of the temperature of both the fridge and freezer can be adjusted
manually by pressing the relevant buttons (button C
selection of the compartment = fridge or freezer / button T
setting of the temperature in the respective compartments) until the desired
values will be indicated (s. chapter 4.3 O
➢ When you set a temperature, you set an average temperature for the whole
refrigerator. Temperatures inside each area may vary from the temperature
values indicated on the display, depending on how much food you store and
where you place them. Ambient temperature may also affect the actual
temperature inside the appliance. When you set the temperature of both the
fridge and freezer these aspects should be taken into account.
W
HEN YOU OPERATE THE APPLIANCE FOR THE FIRST TIME
TEMPERATURES ARE
Freezer
The A
RTIFICIAL
default mode of the appliance (s. chapter 4.6 S
These settings can be changed as needed.
To perform the following settings the display must be unlocked.
❖ You can set the temperature from +8 ℃ to +2 ℃.
➢ Press the button C
fridge (1) goes on.
EY LOCK
/ C
HILD PROTECTION
( A
Fridge
I
NTELLIGENCE
R
. C
OM
/ C
HILD PROTECTION
is activated, none of the following
PERATING BUTTONS AND DISPLAY
I
RTIFICIAL NTELLIGENCE
M (fridge: + 5 ℃ / freezer: - 18 ℃) is the
ODE
EFRIGERATOR
(A) repeatedly until the indicator of the
HOICE
73
. C
OM HOICE
EMP
,
M
+ 5 ℃
- 18 ℃
ELECTION OF THE MODES
:
(8) goes
(A) for the
(B) for the
).
THE DEFAULT
):
ODE
).