Short-Interval Use
The appliance is suitable for short-time operation of max.
3 minutes. Let it cool for 1 minute before using it again!
Pulse Mode
Switch to pulse mode by turning the control to the Puls
position and then release it. Use the appliance in this
operating mode for a maximum of 3 minutes. Let it cool for
1 minute before using it again!
Crushing Ice Cubes
The blades in the mixing jar are also suitable for crushing
ice cubes.
• Put a maximum of 10 pieces (size approx. 25 x 25 x
25 mm) into the mixing jar.
• Use pulse operation Puls for 1 - 3 seconds. Repeat the
process 8 - 12 times.
• When adding fluid, you can use the 2 setting for
1 - 2 minutes.
Operation
Preparation
1. Ensure that the function switch is in the O position.
2. Place the mixing jar in position.
3. Now put the ingredients that are to be mixed into the
mixing jar.
4. Put the lid on.
5. Close the refill opening with the cap.
WARNING:
• Always remove the plug before cleaning.
• Under no circumstances should you immerse the appliance in
water for cleaning purposes. Otherwise this might result in an
electric shock or fire.
• The blades on the knife block are very sharp. A risk of injury
exists!
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• The individual parts are not dishwasher-safe.
36
PC-UM1213_IM
Mixing
Operation is carried out with the setting control:
Level O
= Off
Level 1
= Low rpm
Level 2
= High rpm
= High speed in pulse mode
Puls
Adding Further Ingredients to be Mixed
Items to be mixed or spices can be fed in through the filling
aperture.
1. Please switch off the appliance before doing so.
2. Before you switch the appliance on again, close the
opening.
Stopping Operation
1. Turn the switch to the O position.
2. Wait until the blade comes to a complete stop.
3. Remove the mains plug from the socket.
4. Remove the mixing jar. Turn it anticlockwise.
5. Take off the lid before pouring.
IMPORTANT NOTE:
Citrus juices and food containing acids should never be
stored in metal vessels.
Cleaning
NOTE: Preliminary Cleaning
Half fill the mixing jar with water and turn the switch to
Puls for approximately 10 seconds. Then pour out the
liquid.
For thorough cleaning, please remove the mixing jar.
18.05.20