Schneider Airsystems RF-RMG Original Bedienungsanleitung Seite 21

GB
RF
Contents - Part 2
2.1 General information ..................
2.2 Symbols ..................................
2.3 Safety instructions ....................
2.4 Calibration ...............................
2.5 Commissioning .........................
2.6 Maintenance.............................
2.7 Decommissioning......................
2.8 Spare parts service ...................
2.9 Warranty conditions ..................
The specified illustrations appear at the be-
ginning of the Operating Instructions.
2.1 General information
Observe the safety instructions!
Read the Instruction Manual!
2.2 Symbols
Important: Pay particular attention to these symbols!
Symbol Signal
word
DANGER
WARNING
CAUTION
NOTICE
Symbol Meaning
Read the Instruction Manual
Symbol Meaning
Explosion hazard!
Danger of suffocation!
II/ 4
4
4
5
5
5
6
6
6
6
Hazard level
Immediately hazardous
situation
Potentially hazardous situation
Potentially dangerous situation
Potentially dangerous situation
Document inspections, adjustments and
maintenance work in a maintenance log
book. Specify the name and article number
of the unit when making inquiries. Outside of
Germany, different legal or other require-
ments than those listed here may apply.
Before the unit is used, the Instruction Man-
ual must be read and understood and the
user must receive annual instruction.
Note:Read and memorise part 1 of the
instruction manual!
Subject to technical modifications. Illustra-
tions may deviate from the original.
Suitable energy supply: only filtered com-
pressed air or nitrogen free of condensate
and oil.
Powerful compressor: the air consumption of
the machine / tool is decisive.
Consequences if not avoided
Death or serious injury
Death or serious injury
Minor to moderate injury
Property damage
Consequences if not observed
Injury or death of the operator
Property damage
Incorrect operation
Symbol Meaning
Tripping hazard!