Use As Additional Camera For Tx-128 Set - Technaxx TX-192 Gebrauchsanleitung

→ After login to the App press the plus
→
Select the type of camera for TX-192 it is WiFi camera
→ For the WiFi configuration of the TX-192 follow the shown steps in the
App.
Important: Change the password after you have added the camera
successfully to the Security Premium App. Currently the camera has no
password entered!

Use as ADDITIONAL CAMERA for TX-128 Set

The first camera has been matched with monitor in the factory
already. The image shows up when the kit is powered on. If users
need to pair the camera again or add an additional camera,
operate as below:
Step one: Power on the monitor and camera.
Step two: Reset the camera to enter the pairing mode.
Step three: Enter the Match code interface on the monitor and
click on the match code.
Tips:
1) The camera can only perform the pairing in the reset state; the
camera needs a reset to perform the pairing mode.
2) If the camera does not pair with the monitor, click "Match Code"
again to try again.
3) If you need to replace a new camera, please click "X" on the
monitor to delete the channel and then click on match code.
Note:
• Do not insert a MicroSD card into the camera when paired with
TX-128 monitor.
• When using the camera with TX-128, you are not able to make
settings like for standalone mode via App.
+
symbol on the top right corner.
Model: TX-192 Article No. 4991, 07/2022
11