2.3 Installation steps
WARNING! Failure to install the screws or fixing device in accordance
with these instructions may result in electrical hazards.
WARNING! Do not damage the wiring in the wall while drilling
NOTICE! At least one assistant is required for installation.
Important information: The installation of this appliance must be carried out by
a person who is experienced in such a work
intended for such a person. The manufacturer is not liable for any damage caused
by improper installation.
1. Define a suitable position for the appliance on the wall.
2. Drill 8 holes (Ø 8 mm) into the wall to fix
the bracket and the housing.
3. Insert the dowels. Insert 2 pcs ST4*40 screws into the dowels to fix the
housing.
4. Fix the appliance on the wall. Use the safety
screw ST4*3 to fix the housing.
5
Not included in guarantee.
.
26
5
. The following instructions are