Operating Elements And Displays; Operating Panel And Display; Details On The Device; Signal Tones - ellrona Ergo Touch 3500 Original Bedienungsanleitung

14.1 Operating elements and displays

14.1.1

Operating panel and Display

1 on/off switch
2 button for selection of level (power), temperature (temp) and duration (timer)
3 signal lamp that shows with function(s) are selected
4 selection button (+), increase of the power stage, temperature or duration
5 display shows selected setting
6 selection button (-), reduction of the power stage, temperature or duration
7 min button: sets the level to possible minimum
8 max button: sets the level to possible maximum
The induction cooker has two hotplates which can be used separately.
Therefore you have two operating panels.
14.1.2

Details on the device

This instruction and when "H" is displayed, is to warn that the ceramic hob may still be hot.
Although the induction cooker itself does not generate any heat during the cooking
process, the temperature of the cooking utensil does heat the hob!
Adhere to the following safety instructions in order to avoid being burned by the hot
appliance:
ATTENTION
Risk of burning due to hot surface!
► Do not touch the surface of the ceramic hob while it is still hot ("H" is displayed)
► Do not place any objects on the hot ceramic hob.
14.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the event of a fault.
► The acoustic signal continues to sound until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter entitled
„Fault indications".
for both hotplates
Please note
39