GERATEK Uppsala KG3202P Bedienungsanleitung Seite 74

2. If the automatic defrosting does not meet the requirements, e.g. on days with
high ambient temperatures and humidity, defrost the appliance manually as
described above.
1. Remove the contents from the freezing-compartment and put them into a
cooling box.
2. Place a container in front of the appliance to catch the water.
3. Switch off the appliance by turning the thermostat to position 0/AUS/OFF
and disconnect it from the mains.
4. When the encrusted ice melts put some dry cloths into the freezer-
compartment to hold the water back.
5. Remove the big pieces of ice first.
6. Afterwards remove the small pieces of ice.
7. Wipe and dry the appliance and door seals with dry and soft cloths.
8. After cleaning leave the door open for some time to ventilate the appliance.
Optional procedure if encrusted ice should have occurred:
WARNING! Switch off the appliance by turning the thermostat
(depending on model) to position 0 / AUS / OFF and disconnect it from
the mains.
WARNING! To disconnect the appliance from the mains, you must
unplug the appliance or use a cut-off device.
WARNING! Never use any mechanical items, knives or other
sharp-edged objects to remove the encrusted ice. Never use a steam
cleaner. RISK OF ELECTRICAL SHOCK!
WARNING! Do not use hairdryers, electrical heaters or other
technical devices to accelerate the defrosting-progress. RISK OF
ELECTRICAL SHOCK!
Remove the contents from the fridge and put them into a cooling box.
1.
Switch off the appliance by turning the thermostat to position 0 / AUS /
2.
OFF and disconnect it from the mains or use a cut-off device.
Place a container in front of the appliance to catch the water.
3.
F
REEZER COMPARTMENT
74