Decommissioning - GERATEK Uppsala KG2100P A++ Bedienungsanleitung

When you operate the appliance for the first time or the temperature falls below
a certain level, the appliance will operate with high power to reach the preset
temperature.
C
may be generated inside or outside the appliance by high humidity or very warm
ambient temperatures.
You will hear the compressor click if it is activated or deactivated.
is caused by the compressor while running.
may be generated by sequential expansion and shrinkage of the components of
the cooling system. It is caused by variation of temperature before and after the
compressor is activated or deactivated.

8. Decommissioning

I
F THE APPLIANCE IS NOT USED FOR A LONGER PERIOD OF TIME
Disconnect the appliance from the mains. To disconnect the appliance from
1.
the mains, you must unplug the appliance or use a cut-off device.
Remove all food stored in the appliance.
2.
Dry the inside of the appliance with a cloth and leave the door open for a few
3.
days.
W
HILE AWAY ON AN AVERAGE VACATION
1. Do the same as described above, or
2. let the appliance operate.
a. remove all perishable food from the cooling compartment.
b. clean the cooling compartment.
c. freeze all food which is suitable to be frozen.
D
ONDENSED WATER IN
K
NOCKING
D
ECOMMISSIONING
I
F YOU WANT TO MOVE THE APPLIANCE
ISTINCT NOISE
/
ON THE APPLIANCE
C
LICKING
H
UM
/
SNAPPING
,
TEMPORARILY
/
77
:
(14-21
HOLIDAY
:
:
):
DAYS