Menu Settings; Setting Weighing Units - KERN FOB 0.5K-4NS Betriebsanleitung

8.4 Menu settings

8.4.1 Setting weighing units

Balance display

(example)
(example)
(example)
22
Operation
FOB-S:
 In weighing mode press
3 seconds.
„SEt", followed by „Unit" is displayed
FOB-L:
 Switch off the balance
Press and hold
same time, then release both buttons.
 Press
or
displayed
 Use
to change to the desired unit
 Press
or
 Use
to change to „On"
 Press
or
and set.
button for approx.
and press 3x at the
again, the weighing unit „g" is
, "OFF" is displayed
, the selected unit is displayed
FOB-N-BA-e-1611