Inhaltsverzeichnis
Werbung
Important! Due to the high risk of bodily injury
to the user, the equipment may not be used to
grind up branch or hedge clippings. Moreover, the
equipment may not be used as a power cultivator
to level out high areas such as mole hills.
For safety reasons, the equipment may not be
used as a drive unit for other work tools or tool
sets of any kind.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Engine type: .......................... 1 cylinder, 4-stroke
Displacement ............................................212 cc
Max. engine output .......................4.2 kW / 5.7 hp
Working speed .................................... 3,600 rpm
Fuel: ..................................................petrol (E10)
Tank capacity: .................................. approx. 3.6 l
Engine oil: ........................................ approx. 0.6 l
Spark plug: ............................................ LG F6TC
Blades (number) ............................................. 18
Blade diameter ....................................... 163 mm
Depth setting .................................... -15 - +5 mm
Working width: ........................................ 400 mm
LpA sound pressure level 85,4 dB(A), K = 2dB (A)
LWA sound power level ......................... 98 dB(A)
Vibration ahw ...................6,74 m/s
Weight: ........................................................32 kg
Anl_GC_SC_4240_P_SPK7.indb 19
Anl_GC_SC_4240_P_SPK7.indb 19
GB
5. Before starting the equipment
The equipment is delivered unassembled. The
grass basket and the complete push bar must
be assembled and mounted before using the
equipment. Follow the operating instructions step-
by-step and use the pictures provided as a visual
guide to easily assemble the equipment.
Fitting the top push bar holder (Fig. 4a)
Position the upper push bar (Fig. 4a / Item 2) such
that its holes line up with the holes of the lower
bar. Screw the tubes together, using the screws
(Fig. 4a / Item 12) and nuts (Fig. 4a / Item 8) sup-
plied. Use the supplied cable clips (Fig. 4b / Item
11) to secure the throttle cable and the engine
Start / Stop cable to the lower push bar.
Fitting the debris box (Fig. 5)
Lift the ejector fl ap (Fig. 5 / Item 5) with one hand
and attach the debris box (Fig. 5/Item 6) to the
handle from above using your other hand.
Important: Before you attach the debris box you
must ensure that the engine is switched off and
the roller is not rotating.
6. Operation
Important!
The engine does not come with oil in it.
Therefore, be sure to add oil before starting
the engine. The oil level in the engine must be
checked each time before carrying out any
work.
Starting the equipment (Fig. 6 – 7)
In order to avoid any unintentional start-ups of the
engine, it comes equipped with an engine brake
, K = 1,5 m/s
2
2
(Fig. 6/Item 1) which must be pressed at all times
whilst the device is in use, otherwise the engine
will stop.
Important: When the engine brake lever is re-
leased it must return to its initial position and the
engine must stop. If this is not the case, do not
use the equipment again.
- 19 -
15.03.2019 06:25:45
15.03.2019 06:25:45
Werbung
Inhaltsverzeichnis
