Step-By-Step Plan - Bonga HIFLEXX 740 G/M Anleitung

3. STEP-BY-STEP PLAN

The following step-by-step plan outlines how to assemble the tent in the safari design. Remove
the tent from the box supplied along with all of the parts. It's a good idea to keep the box for
easy storage.
There are already four corner clamps attached to the
corners of the stretch tent. These may not be removed or
replaced. Check regularly that the corner clamp is under
sufficient tension.
Only for - 10 m: Use of corner clamp on
aluminium pole (with hand clamp):
STEP 1: OPEN TENT CANVAS
Lay the stretch canvas open in the location where the tent is
to be assembled. Make sure that the correct side is on top.
TIP: Lay the stretch
marks on the inside. This groundsheet is not supplied
by Bonga.
Only for - 10 m: Use of corner clamp on
wooden pole (without hand clamp):
SAFARI
tent on a groundsheet
10
to avoid