Faber GV60TT/08 Bedienungsanleitung Seite 22

nd
•
If a 2 period setting is not desired, save the settings by pressing the OFF- key (fig.
1.8) or wait for ten seconds.
•
Press the SET–key (fig. 1.6) again and now P2
display screen, the time indication will start to blink and now set the starting time.
•
Press the SET–key (fig. 1.6) again, now P2
the time indication will start to blink and now set the starting time.
•
Save the settings by pressing the OFF- key (fig. 1.8) or wait for ten seconds.
(homecoming) will appear in the
(night) appears in the display screen,
22 < < < <