Connecting Your Audio Output Device Using The Audio Cable - Medion E62740 Bedienungsanleitung

played in the device list on your audio output device as soon
as the signal is found.
If you are prompted to enter a password for pairing, enter
"0000".
 Now connect your Bluetooth-enabled audio output de-
vice to the headphones.
You will find more information about the Bluetooth
function of your audio output device in its user
manual.
Once the two devices are paired with each other, the operat-
ing LED will flash blue and you will hear a sound through the
headphones to confirm that they are connected.
When signals are being transmitted via Bluetooth, you can
control playback using your audio output device and the op-
erating buttons on the headphones.
Every time the headphones are switched on, they automati-
cally attempt to connect to the last audio output device con-
nected via Bluetooth.
7.1. Connecting your audio output
device using the audio cable
You can use a 3.5 mm audio cable (not provided) to connect
your headphones to any device with a suitable audio con-
nection (3.5 mm jack) and enable audio playback. To do so,
proceed as follows:
 Plug the audio cable jack into the AUX IN socket on your
headphones and connect the cable to your audio out-
put device.
 Start playback on the connected audio output device.
DE
EN
FR
CZ
HU
PL
TR
SK
49