Schneider Airsystems SEM 200-8-6 W-oilfree Original Bedienungsanleitung Seite 7

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Maintenance.............................
1.7 Compressor inspections .............
1.8 EC Declaration of Conformity ......
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the in-
struction manual!
1.4 Technical data
Suction capacity
Filling capacity
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
L Sound pressure level at distance of 4 m
PA4
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2 Scope of delivery
3
– Compressor with instruction manual
3
– Spiral hose
3
– Blow-off gun
4
– Documents accompanying compressed air
4
vessel
4
1.3 Conventional use
4
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
The compressor has no sound-power certifi-
cation as specified in 2000/14/EC and cannot
be used out of doors.
Any other type of use is considered contrary
to the intended use.
SEM 200-8-6 W-oilfree
200 l/min
110 l/min
230 V
10 A
1,1 kW
2850 rpm
8 bar
6 bar
6 l
8 bar
63 dB(A)
460 x 235 x 645 mm
19 kg
10 1/h
60:40 --
40 cm
5-35 °C
GB
I/3