Medisana MC 825 Gebrauchsanweisung Seite 25

3.1 Usage
The use of the Shiatsu acupressure massage seat cover will improve your wellbeing after a stressful day.
The massage effect is particularly useful for treating tense muscles and tired tissue. The unit provides
pleasant relaxation for overcoming everyday stress. The massaging can improve your well-being, and
is also useful in the sport and fitness areas.
3.2 Operation
Start-up
• Place the massage seat cover on a high chair or armchair and attach it to this by means of the
fasteners on the back. Ensure that the seat cover is supported over its entire area and has a
sufficiently high backrest.
• Insert plug into the mains socket. Ensure that the power supply is easily accessible.
• Take a seat on the Shiatsu acupressure massage seat cover and familiarise yourself with the functions.
• Sit comfortably and upright. Ensure you sit centered and such that the massage heads
to the left and right of your spinal column.
Operating the unit
The MC 825 shiatsu seat cover has three functions for an effective massage: fingertip massage (Shiatsu
massage), acupressure massage and heat. The heat function can only be used together with the
Shiatsu massage in the back, during which the neck massage and the acupressure massage in the seat
base and in the waist area can also be activated. Do not use the unit for more than 15 minutes at a
time. After approx. 15 minutes, the unit will switch off automatically. Always allow the unit to cool
down fully before you use it again.
Buttons on the control unit
Use the buttons on control pad to operate the massage seat cover:
After you have plugged the plug into the mains socket, the LED of the On/Off button
Switch on the device by pressing ON/OFF
standby mode. If no other button is pressed, the device turns off after 15 minutes automatically.
DEMO button
You may activate demo function with or without pressing ON/OFF button
button , the device starts automatically with introduction of different back setting with different
functions. The LEDs schow the current massage regions and functions. The device will stop once all
functions worked.
NECK MASSAGER button
Adjust the massage heads to the desired height by turning wheel
Switch on the device by pressing ON/OFF button
NECK MASSAGER button
once, left massage head
Press it a second time, neck massage stops.
BACK buttons
Switch on the device by pressing ON/OFF button
Select the region you wish to massage with the back massage button
Whole Back button
The Shiatsu massage heads
shoulder area, massaging the back in a circular motion whilst doing so. Once the uppermost position
has been reached, the direction of rotation of the massaging heads is reversed. The heads then travel
button
is for the neck/shoulder reversible kneading massage. Press this button
is kneading counterclockwise; right massage head
(full back)
move from the "Park" position at the base of the backrest, up to the
. The LED illuminates.
.
.
.
(
3 Operating
can move
flashes.
The device starts with
before. Press the DEMO
is kneading clockwise.
/ / ).
GB
17