Battery Access & Installation; Standard Profile (Tamper Evident) Keypad; Standard Profile Serviceable Keypad - dormakaba LA GARD Installationsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

a. Connect the Keypad cable to the port on the side of the Multiplexer

b. Connect the first safe lock (known as Lock #1 to the System) from the ENT port to the #1 input

on the Multiplexer

c. From Lock #1, connect from the BAT port to a power supply (either the AC Adapter into a wall

receptacle or to the BAT port of a Battery Box)

d. Repeat Step b for each safe lock

e. Display Keypads will show prompts on screen to continue, while non-Display Keypads require

pound (#) commands. Consult the System User Guide (Document #7041.0320) for more

information

Battery Access & Installation

The System can be powered multiple ways: AC adapter (see Document #7037.0320), Battery Box (see

Document #7035.0320), and/or battery power from the Keypad.

Only the standard profile Keypad possesses a battery pack for primary power, while a low-profile version uses a

battery backup in case of emergencies.

For Standard Profile (Tamper Evident) Keypads, do the following to access and install the batteries:

Press downward on the spring-loaded button located at the bottom of the keypad's battery pack. The

spring mechanism will partially eject the battery pack out of the housing.

2. With the battery pack partially removed, grab the tip of the battery pack and remove it from the Keypad.

3. At this point the batteries are free to be added/removed/replaced. When installing the 9V batteries, use

the markers in the battery tray to ensure the proper +/- orientation for each battery.

4. When finished installing the batteries into the battery tray, slide the tray back into the housing unit. When

this is done properly, you should hear a small "click" sound ensuring the tray is secured properly.

For standard profile Keypads, do the following to access and install the batteries:

First, press the button on the underside of the keypad body. While holding this button, rotate the keypad

counterclockwise until it becomes free from the baseplate. Flip over the keypad so that the reverse side of

the keypad body is visible.

dormakaba USA Inc. | Keypad Installation Guide 7033.0322 Rev D 07/22

Inhaltsverzeichnis