Microlife WatchBP Office Bedienungsanleitung Seite 29

3) Insert the Bluetooth receiver into a USB port
of the computer after the installation program
requests to do so.
4) Restart the computer after installation is
completed.
Select a single USB port and make sure to always use
*
the same port in the future.
Do not use other Bluetooth receiver.
*
5) Turn on the Bluetooth function of the WatchBP
*
Restart
your
DC 6V 600mA
computer
Office device by switching the Bluetooth switch
at the back of the device to the "ON" position.
The Bluetooth icon will illuminate and flash
continuously to show a connection.
It is noted that WatchBP office device will not
respond to any button pressing or switching when
the Bluetooth is on. This is to prevent accidental
interruptions during the measurement.
DC
28
EN