Technical Data; Vibration Information; Jig Saw Safety Warnings; English - AEG PST 500 X Originalbetriebsanleitung

TECHNICAL DATA

Jig Saw
Production code
Rated input
Stroke rate under no-load
Lengths of stroke
Bevel cuts up to
Cutting depth max. in:
Wood
Steel
Aluminium
Weight according EPTA-Procedure 01/2003
Noise information
Measured values determined according to EN 60 745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!

Vibration information

Vibration total values (triaxial vector sum) determined according to EN 60745
cutting boards
Vibration emission value a
h, B
Uncertainty K=
Sawing of sheet metal
Vibration emission value a
h, M
Uncertainty K=
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for di erent applications,
with di erent accessories or poorly maintained, the vibration emission may di er. This may signi cantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched o or when it is
running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury. Save all warnings and
instructions for future reference.

JIG SAW SAFETY WARNINGS

Wear ear protectors. Exposure to noise can cause hearing loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
Additional Safety and Working Instructions:
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is re-
commended, such as dust mask, protective gloves, sturdy non-slip
footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Wear a suitable dust protection mask.
Chips and splinters must not be removed while the machine is
running.
Always use the protective shields on the machine.
Do not use cracked or distorted saw blades.
PST 500 X
4290 31 01...
4282 61 01...
... 000001-999999
435 W
3700 min
-1
15 mm
45°
40 mm
6 mm
10 mm
2,9 kg
89,5 dB(A)
GB
100,5 dB(A)
18,3 m/s
2
1,5 m/s
2
20,0 m/s
2
1,5 m/s
2

English

9