Rear Panel; Hardware Setup - Micro-Star International 870-C45 Serie Bedienungsanleitung

All manuals and user guides at all-guides.com

ReaR PaneL

the rear panel provides the following connectors:
Lan
PS/2 mouse
Line-in RS-out
CS-out
Line-out
PS/2 keyboard Serial port uSB ports uSB ports uSB ports
MiC SS-out

HaRdWaRe SetuP

this chapter tells you how to install the CPu, memory modules, and expansion
cards, as well as how to setup the jumpers on the mainboard. it also provides the
instructions on connecting the peripheral devices, such as the mouse, keyboard,
etc. While doing the installation, be careful in holding the components and follow
the installation procedures.
CPu & Cooler installation for aM
When you are installing the CPu, make sure the CPu has a cooler attached on the
top to prevent overheating. Meanwhile, do not forget to apply some thermal paste
on CPu before installing the heat sink/cooler fan for better heat dispersion.
Follow the steps below to install the CPu & cooler correctly. Wrong installation will
cause the damage of your CPu & mainboard.
2