Charging The Battery; Power Settings - Shark IZ201EU-Serie Gebrauchsanweisung

CHARGING THE BATTERY

LITHIUM ION POWER PACK CHARGER
Plug the Lithium Ion Power Pack Charger into
a wall socket.
OUT OF THE VACUUM
To remove the battery, squeeze the Battery
Release Button and slide backwards. Plug the
charger into the charging port on the battery.
44 s h a r kc l e a n . e u
IN HANDHELD VACUUM
Remove the handheld vacuum from the wand
by pressing the Wand Release button and pulling
up. Plug the charger into the charging port on the
handheld vacuum.
FLEXOLOGY® STORAGE MODE
To put the vacuum in storage mode, press
the Unlock latch while folding the handheld
vacuum forward until the wand clicks and locks.
Plug the charger into the charging port on the
handheld vacuum.
ION POWER SETTINGS
OFF
Slide switch to the top to turn off power.
To begin vacuuming, slide switch to the
desired setting.
CARPET SETTING
Carpet
Use this setting to pick up debris below the surface
of your carpets.
HARD FLOOR SETTING
Hard Floor/Small Area Rugs
Use this setting to clean floors and small area rugs.
BOOST MODE
For an added boost in power, pull the Trigger
on the handheld vacuum. Release it to return
to standard power.
s h a r kc l e a n . e u 45