Technical Data; General Safety Instructions - Gude 1/2 PRO Bedienungsanleitung

Supply includes
Picture 1:
1. Tool clip for driving square
2. Compressed air connector
3. Switching lever
4. Operating button
Appliance
½" PRO pneumatic impact tightener
Professional pneumatic impact tightener with a high-efficient
double impact for a bigger load. Saves energy due to low air
consumption compared to other strong impact tighteners. The
engine cowl and handle are out of composite plastics
(insulates against cold and suppresses vibrations). 3-level
output regulator at the back of the appliance, low weight.
GB
EU Declaration of Conformity
We, Güde GmbH & Co. KG Birkichstraße 6, 74549
Wolpertshausen, Germany, hereby declare the conception
and construction of the below-mentioned appliances
correspond - at the type of construction being launched - to
appropriate basic safety and hygienic requirements of EC
Directives.
In case of any change to the appliance not discussed
with us the Declaration expires
Marking of appliances: 1/2" PRO Order No. 75130
Date/producer signature: May 27, 10
Signed by: Mr Arnold, Managing Director
Appropriate EU Directives:
2006/42/EG
Harmonised standards used:
EN 792; EN 50144
Place of certification: TÜV Rheinland Product Safety
Am Grauen Stein – 51105 Köln

Technical data

½" PRO
Service pressure:
Air consumption:
Thread connector:
Drive:
Max. enabling moment:
Free-running revs:
Recomm. hose cross. section:
L noise data:
WA
Weight:
Order No. 75130

General safety instructions

Safety notice! Failing to follow these
instructions can cause an injury to you or
other persons.
Please read carefully all instructions before putting the
pneumatic appliance into operation. All persons
engaged in the operation must be thoroughly informed
about safety instructions at using the pneumatic
appliances. All servicing works and repairs can only be
executed by authorised professionals.
Power socket nuts can solely be used for impact
tighteners. Never use any other types of socket nuts.
Never use power socket nuts with a worn or knocked
out driving square. Before each use, please check
whether the driving square for power socket nuts and
extension or spindle of the impact tightener are not
worn or show any hair crack. Before use, make sure
the power socket nut is safely attached to the driving
square of the appliance.
6.3 bar
133-515 l/min
1/ 4"
1/ 2"
1,500 Nm
-1
7,500 min
10 mm
95 dB
2.0 kg
21
Always take a stable and safe posture and working
position before using the appliance.
Check whether the power control is set correctly before
each use. Wrong setting can lead to break or
breakaway of the threaded joint and uncontrollable
motions of the appliance.
Before putting the appliance into operation, please
make sure the change-over valve for right and left run
is in a correct position. Do not put the appliance into
operation before the power socket nuts are firmly and
correctly seated on the screw head or nut.
Regularly check the pneumatic hose and all
connectors for wear. Use the quick-acting coupling as
recommended for assembly only. Carry the appliance
with its handle, not the hose. In such cases, your hand
must not be near the operating button, either.
Do not try to hold or guide the appliance with its rotary
power socket nuts.
Never exceed the recommended maximum service
pressure (6.3 bar)
If prescribed, use safety outfit.
The appliance is not grounded and insulated against
electricity. The appliance can in no case be used at
places where there is a possibility of getting into
contact with electricity.
When changing the power socket nuts, it is
recommended to interrupt the air supply or at least
make sure hands were in a sufficiently safe distance
from the operating button.
Prevent that the rotary component of the appliance
from getting near or in contact with loose parts of
clothes, ties, hair, cleaning cloths, etc.
Ensure a sufficient space for reverse motion when
loosening the threaded joints so that the operating
hand could not get jammed as the tool moves along
the thread length with the impact tightener in reverse
motion when loosening.
Use only extensions, adapters and joints that are
explicitly allowed to be used with impact tighteners.
If the appliance, when in use, shows any signs of
irregular working and power it is necessary to stop
using it immediately and service or repair the
appliance.
Do not use any unnecessarily long delivery hoses to
prevent falls as a result of trip.
Read the compressor's Operating Instructions and
follow safety instructions for using the compressor.
ALWAYS wear proved protective glasses and ear
protectors.
Put away watches, rings and other disturbing items.
Loose pieces of clothes and jewels could get caught in
the compressor and thus cause serious injuries.
The operating button must not be used when the
appliance is being connected to the air supply.
Disconnect the appliance from air supply if not used.
NEVER replace any parts of accessories and
SERVICE when the appliance is connected to the air
supply.
Take a safe posture. Make sure you did not lose your
balance.
When working with the appliance, ensure your hands
could freely move to guarantee safe working.
Use the appliance at a speed for which it has been
designed only.
Look after the appliance carefully and follow all
instructions for lubrication and maintenance of the
appliance.
Do not damage the hoses and couplings by carrying
the appliance with its hose and do not damage the
hose by disconnecting it from the air supply by pulling.
Prevent the hose from getting into contact with
excessive temperatures, oil and sharp edges. The
hose needs to be replaced if damaged or worn.