Setting The Suction Power; Changing The Dust Bag - SEVERIN BC 7047 Gebrauchsanleitung

Setting the suction power

The power controller can be set steplessly. The power regulator position should be adjusted according to the
floor to be cleaned:
2

Changing the dust bag

Before changing the dust bag, switch off the device and disconnect the power plug from the socket.
ˆ
3
The dust bag and its contents can be disposed of in normal household waste unless it contains dirt that is
ˆ
forbidden in household waste.
Only use dust bags of the same type:
ˆ
Either from the Severin
range of spare parts:
Severin dust bag set
(4 dust bags + 1 motor
filter)
Art. No.: SB7218
It is recommended that the filters be cleaned as well at this time ("4 Cleaning and maintaining the device"
ˆ
on page 22).
With regard to changing the dust bag, see also  Quick Start Guide  Cleaning and maintenance.
maximum power: for hard floors, heavily soiled carpets
ˆ
high power: for carpets, rugs and such like
ˆ
moderate power: for upholstered furniture, upholstery and mattresses
ˆ
minimum power: for curtains, drapes and such like
ˆ
Latest point at which to change the dust bag:
ˆ
as soon as the suction power noticeably decreases
ƒ
as soon as the light on the power regulator lights up red (Fig. 3),
ƒ
before prolonged storage or
ƒ
before shipment.
ƒ
Or from the Swirl range
of accessories: Swirl
Y101
Swirl
are registered trademarks
of a company of the Melitta
Group and are not connected to
SEVERIN in any way.
V
acuum cleaning
®
MicroPor Plus
® ®
, Y 101 and MicroPor
® ® ®
®
21