Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The switch can be changed by inserting a screwdriver into the slot and thus moving the switch. This
process protects against accidental changeover during operation.
ATTENTION: if the switch is set incorrectly, you can damage the voltage converter AND 110V device.
POWER
The maximum power of the voltage converter is also the continuous power. As soon as this power is
exceeded, the device fuse of the converter will blow to protect the voltage transformer.
The power of the voltage converter should always be above the maximum power requirement of
your 110V device. The nominal power of your 110V device can be found on the identification plate of
your device. You can run several 110V devices on the converter as long as the total power of the
110V devices does not exceed the converter power.
As far as your 110V unit is equipped with an electric motor, the starting current of the motor will be
above nominal power as indicated on the identification plate. If the starting current is not known,
please calculate with a starting current of 2-3x the nominal power.
Item nr.
Operation
EL651031 LLD300
220 -> 110V
110 -> 220V
EL651123 LLD500
220 -> 110V
110 -> 220V
EL651184 LLD1000 220 -> 110V
110 -> 220V
EL651200 LLD2000 220 -> 110V
110 -> 220V
EL651210 LLD3000 220 -> 110V
110 -> 220V
All manuals and user guides at all-guides.com
Max. Power
Cont. Power Motor Power
300W
500W
1000W
2000W
3000W
300W
bis ca. 150W
500W
bis ca. 200W
1000W
bis ca. 400W
2000W
bis ca. 800W
3000W
bis ca. 1200W
Fuse
3A (T)
5A (T)
10A (T)
20A (T)
30A (T)
Werbung
Inhaltsverzeichnis
