Receiver Rsat 900 Ng (Next Generation); General Settings - JETI model duplex REX FW 1.14 Bedienungsanleitung

EN
COMPUTER RADIO CONTROL SYSTEM
7 Rsat 900 NG
(Next Generation)
The Duplex RSAT 900 NG series receivers are designed for
operation with JETI DC/DS transmitters fitted with a 900MHz NG
module. These 900MHz NG receivers have a better signal range and
are less affected by interference. Duplex RSAT 900MHz NG receivers
use the latest LoRa (Long Range) module technology. The 900MHz
NG receivers are intended as a backup system if the 2.4GHz main
system fails due to external interference. This significantly increases
the safety of your RC model. Receivers RSAT 900 and RSAT 900 NG
are not compatible!

7.1 General Settings

Output period (PPM 10 – 30ms): Output signal period setup. This
parameter is fundamentally influencing servo behaviour. With
lower output period values the reactions (response) of analogue
servos become faster, but current consumption increases. With a
too low setup value some servos may even start chattering.
Low Voltage Alarm: Value represents the setup threshold level for
alarm purposes. During operation, as soon as the actual voltage
21