Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
21. The apparatus shall not be exposed to dripping or splashing and no object filled with
liquids, such as vases, shall be placed on the apparatus.
22. Minimum distance 10 cm around the apparatus for sufficient ventilation.
23. No naked flame sources such as lighted candles should be placed on the apparatus.
24. Attention should be drawn to the environmental aspects of battery disposal.
25. Use the apparatus in moderate climates.
When unpacking, ensure that the following elements are included:
1 x Karaoke CD Player with 2 integrated microphones
1 x Instruction manual
WARNING: All packaging materials, such as tape, plastic sheets, wire ties and tags are not
part of this product and should be discarded.
Your Karaoke CD Player operates with the AC/DC adapter 6V
negative centre
size batteries (not included).
AC operation
1. Check that the unit is switched off.
2. Connect the adapter plug (not supplied) to the socket on the side of the unit.
3. Connect the adapter into a main socket.
Warning: Disconnect the adapter if the game is not used for a long period of time to prevent
overheating. When the game is powered by an adapter, do not play outside. Check the state
of the adapter and the connection cords regu larly. If their condition is deteriorating, do not
use the adapter until it has been repaired. The toy shall only be used with a transformer for
toys. The adapter is not a toy. The console should be disconnected from the power supply to
be cleaned if liquids are used for cleaning. The toy is not intended for children under 3 years
old. Misuse of transformer can cause electrical shock.
Parental advisory: transformer and adaptor for toys are not intended to be used as a toy.
The usage must be under parental advice.
Battery installation
1. Using a screwdriver, open the battery compartment cover located at
the back of the unit.
2. Insert 4 x 1.5V
the polarity indicated in the compartment, and as per the diagram
shown opposite.
3. Close the battery compartment and tighten the screw.
Note: The AC adapter must be disconnected from the AC socket on the
side of the unit in order for the product to operate on battery power.
RCDK100IM1196_V03_303.indd 12
UNPACKING THE DEVICE
POWER SOURCES
. I
nput: 100V - 240V ~ 50 / 60Hz, 0.3A or with 4 x 1.5V
C/LR14 size batteries (not included) observing
12
12
, 833 mA
, with
C/LR14
10/5/16 6:13 pm
Werbung
Inhaltsverzeichnis
