Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.
Carefully insert the M.2 SSD with heat sink into the M.2 slot of your mainboard at an angle of
about 30°. Now fix the heat sink and M.2 SSD with the screw provided.
Note: Make sure that the M.2 SSD and M.2 socket as well as the supported protocol (e.g.
NVMe) match (e.g. M-Key NVMe M.2 SSD and M-Key socket for example on the mother-
board).
7.
Finally, plug the 4 pin fan connector onto a free 4 pin connector on your motherboard. The fan
runs continuously when connected. The fan is NOT temperature controlled, the speed may only
be adjustable via the BIOS!
Manual IB-M2HSF-705
12V 4Pin
(Fan cable port)
Werbung
