Hardware Installation; Input; Control Buttons - YURAKU YUR.VISION YV22WB1 Benutzerhandbuch

Hardware Installation

Be carefully to your LCD monitor, it's very exquisite but easy to broken. Turn off LCD's and PC's power
before you set it up. Follow our installation step by step.

Input

*NOTICE: DVI and Audio functions are optional features.

Control Buttons

There are 5 keys for user to set up the monitor, including "Auto Adjust", "OSD menu", "Power", "Adjust
<->", "Adjust <+>". The following descriptions are the introduction of these Keys.
Auto Adjust (Function)
A Function Select Button: This button allows you to select the control functions up in the OSD.
Hotkey: Press this button to apply the monitor setting automatically.
Menu (Function)
M Function Select Button: This button allows you to select the control functions down in the OSD.
Hotkey: Press this button to get a pop-up OSD menu.
Power: Turn the LCD power on and off. When the power is on, the light is showing green,
Stand by will be orange.
- Adjust < - >: Decrease the option value in the OSD menu.
+ Adjust < + >: Increase the option value in the OSD menu.
All manuals and user guides at all-guides.com
AC input：This is for connecting the power cable.
VGA port : This can be connected with the D-Sub 15 pin signal
Cable.
DVI port : This can be connected with the DVI signal Cable.
Audio In：This can be connected to the PC audio-out connector
of sound resource.
4