FujiFilm WP-XQ1 Bedienungsanleitung Seite 46

Positioning the Digital Camera in the Waterproof Case
3
Open the waterproof case (pg.8) and pull the mode dial up (➀), then set
the camera in it (➁).
4
Insert the silica gel pack into the space underneath the bottom of the
camera.
Silica gel pack
Slip the camera into the waterproof case
until it stops securely.
When opening or closing the waterproof
case, take care not to catch your fingers
or palm in the case.
When setting the camera, pay attention
to the position of the camera upon
attachment.
Make sure to insert the silica gel pack
correctly. If it is incompletely inserted, it
will prevent the O-ring from acting as a
seal, and water will leak in.
EN-12