Operating; Using The Detergent Bottle - Westfalia LASER 2000 33 88 63 Bedienungsanleitung

Operating

1. Turn on the water tap and connect the plug to a socket. The max. water
temperature should not exceed 60°C. Never switch on the high-pressure
cleaner if the water supply is not turned on in order not to damage the
pump.
2. Switch on the high-pressure cleaner with the ON/OFF button (G). In stage I
the high-pressure cleaner is switched on and in stage 0 it is switched off.
3. Press the lock-off button (A) inwards in order to release the trigger.
4. Firmly hold the trigger (B) with one hand and hold the lance (C) with the
other hand. Press the trigger (B) and direct the lance (C) to the object or
surface to be cleaned.
5. You can select three types of water jets. Turn the nozzle on the lance (C)
clockwise or counter clockwise to achieve direct power jet, V-spray or wide
spray. The created working pressure in the high-pressure cleaner depends
on the nozzle setting. The smaller the nozzle opening is, the higher the
dynamic pressure will be. This pressure is 60 bar.
6. To finish operation, first switch off the high-pressure cleaner. Then turn off
the water tap and pull the plug to unplug.
7. Press the lock-off button (A) in order to lock the trigger (B).
8. Unscrew the high-pressure hose (E) from the high-pressure cleaner. Rinse
the filter (I) under tap water after each use.

Using the Detergent Bottle

Only use suitable and liquid detergents in order not to damage the object to be
cleaned.
1. Insert the filled detergent bottle with nozzle (J) into the collet of the gun and
tighten it by turning clockwise.
2. For operating the high-pressure cleaner follow the steps as described
under „Assembling" and "Operating".
3. When working with the detergent bottle, please note that no water jet
comes out of the nozzle. Only frothed detergent and water come out from
the nozzle.
All manuals and user guides at all-guides.com
Operating
10